Wood Filler & Spackle – EVO

6.99 $79.99 $X

Easy-to-apply, Fast-drying Wood filler & Spackle !

EVO™ Wood Filler is a water and acrylic based product designed for both interior and exterior wood restoration projects. It fills cracks, holes as well as imperfections in wood surfaces leaving a beautiful, smooth and even finish. This wood mastic is also very useful to repair particle boards and plywood in addition to providing a remarkable resistance to abrasion also before the finishing. This product is available in 10 colours representing popular wood species and gives the true appearance of wood. Furthermore, this wood filler is easy to apply, water resistant and solvent-free. Since it dries very quickly, it can be sanded in less time than traditional wood filler and can be varnished, painted, stained, sawed, nailed or screwed without any problem. Once the product is dry, you will be pleasantly surprised to see how solid the surface is and thus, enjoy a long-lasting repair. Our EVO™ Wood Paste is exactly aligned with our eco-friendly values and innovative wood solutions.

  • Easy to apply
  • Smooth and uniform finish
  • Interior and exterior 
  • Dries quickly
  • Low odour and solvent-free
  • Water and moisture resistant
  • Can be varnished, painted, stained, sawed, nailed and screwed
  • Provides a durable long-lasting repair


  • Use only on bare, clean, dry wood surfaces free of dust or other contaminants that may prevent the wood filler from sticking to the surface.
  • Do not apply on painted, varnished, waxed or oiled surfaces. Remove old finish before applying wood filler. Perform an adhesion test if necessary.
  • Do not sand beyond 120 grit before applying the stain or the topcoat so that it can properly penetrate the surface.
  • If the product has thickened in the container, add a few drops of water to rehydrate it and mix well.


  1. Choose the tint closest to the desired final wood colour.
  2. Apply a coat of wood filler with a trowel or a putty knife on the surface to be repaired.
  3. Pick up the excess, taking care to even out and level the surface to be repaired.
  4. Holes and cracks to be repaired should ideally not exceed 3/16″.


  • Small repairs : 1 to 2 coats.
  • Large repairs : 2 to 3 coats.


Varies from one repair to another. (As an indication only)

  • DRYING TIME : 30 minutes.
  • BEFORE SANDING : 1 hour.
  • BETWEEN COATS : 1 to 2 hours.
  • READY FOR TOPCOAT : 4 hours &+.


Water, immediately after use.


118 mL | 473 mL | 3,78 L


White | Light Wood | White Wood | Pink Wood |  Oak | Light Walnut | Dark Walnut | Wenge | Ebony | Driftwood


  • Keep product in original airtight container.
  • Protect from freezing and very high temperatures.

WARNING ! It’s best to test the colour on an unseen surface before full application. Images for colours below may differ from reality.

Technical data sheet

Safety data sheet

Product sheet

Advertising flyer