Here is a product that will allow you to express your creativity. Transfer Gel is a hypoalergic acrylic emulsion free off any VOC. This product can be used to transfer ink-jet or laser-printed images to surfaces painted with Milk Paint, Fusion Mineral Paint or other porous surfaces.
If your image contains text, you need to configure the printer as a mirror, so that the text is on the right side when transferred.
Apply the gel to the surface with a brush. Place the printed side facing down on the surface when the gel is still wet. Gently use your hands or a plastic spatula, ruler or bank card to eliminate air bubbles.
Allow to dry for 16 to 24 hours.
Wet the paper with a sponge to soaks the paper fibres. Gently rub the surface with a sponge or cloth to remove the paper. If you want to give a worn effect, you can scrub the image so that it fades in some places.
You should cover your project with a finish to protect the transferred image. You can use Fusion Tough Coat Sealer or MULTI-PROTECT by ÉVO for painted surfaces with Milk Paint or Fusion Mineral Paint.