BLANCHON

Top Coat for UV Protector – Blanchon

159.95 $X

Blanchon UV Protector Finish, for vertical surfaces only.

Colourless, water repellent finish for the UV Protector on vertical exterior structures. All species: Softwoods, Exotic, Country Wood including Roasted and Autoclaved.

  • Apply on all vertical wood cladding impregnated with UV Protector
  • Non-film forming
  • Odourless
  • Will not flake
  • Easy maintenance

Preparation

This product is ready for use, do not dilute. Shake well before and during use.

Perfect adhesion to wood previously impregnated with Blanchon UV Protector.

Application

Apply the Top Coat for UV Protector in the direction of the wood grain, paying particular attention to scratches, joints and ends.

Number of coat

Apply the second coat after a minimum of 4 hours.

Do not leave more than 36 hours between two layers.

Protect from rain, water repellent protection is effective after 12 hours.

Application

As soon as the wood surface clears naturally over time and it appears wet after the rain, dust off the surface and then apply the Top Coat for UV Protector. If maintenance is late and the surface is worn, use LIGNA DEGRIO and then re-wet the UV Protector before applying the Top Coat for UV Protector.

Covering power

129 p2 / liter

Disposal of residues

Thoroughly wring the material after application. Wipe well. Rinse in a container with a simple bottom of water. Lasse this water to evaporate and throw the residues in the trash. Close the container well after use. Do not put residues in the sewer.

Dispose of contents and container to an approved landfill.

Warning

Store away from frost.

Do not apply below 12 ° c

For more information, please consult the product data sheet for this product, available on request or at www.blanchon.com on behalf of Protector for Cladding.