LIGNA

TANDEM-2 – Multisurface Colourless Finishing Oil – LIGNA

2.99 $819.95 $X

TRADITIONAL OIL FOR ALL INTERIOR WOOD SURFACES SUCH AS RAW, STRIPPED OR HARDWOOD; FLOORS, FURNITURE, WALLS, CEILINGS AND WOODWORK.

Oil for floors, furniture, kitchen cabinets, countertops, kitchen islands, interior doors and windows, woodwork, walls and ceilings.

TANDEM-2 is a natural finishing oil designed to protect and seal the wood, either alone or with TANDEM-1 stain. It is easy to apply, it leaves no surface film, it is easy to maintain and enhances the wood’s traits.

TANDEM-2 Finishing Oil provides excellent abrasion resistance, is particularly used for floors and protects wood from water, stains and offers excellent durability. This product will never flake or peel due to its good impregnating capacity.

The technology TANDEM-1 (impregnation oil) and TANDEM-2 has been proven for many years. It provides a durable, easy-care finish that is suitable for both industrial and residential applications. Even amateur hobbyists will find it easy to achieve a professional-looking finish.

This video is subtitled in English.

PREPARATION :

The surface must be clean and free of wax and varnish residue. Make sure the product is at room temperature before application.

Mix before applying. Sand wood with 100–120 grit sandpaper. Remove dust with a clean, dry, WHITE COTTON RAG. Keep TANDEM-2 at a temperature above 15 °C.

For high-density wood, such as maple or exotic woods, moisten with a clean floor mop or damp WHITE COTTON RAG. When surface is completely dry (about 2 hours), sand gently with 220 grit sandpaper to break down the wood’s fibre. Remove dust meticulously.

APPLICATION:

Apply a thin coat with a WHITE COTTON RAG or an APPLICATOR PAD for furniture and a PAD PAINTER for the floor. Spread TANDEM-2 well to avoid increasing thickness. After 10 to 15 minutes maximum, with the help of a clean and dry WHITE COTTON RAGscrub along the wood grain to help oil penetration and eliminate any excess.

OPTIONAL – To soften the surface and increase lustre by 20%, polish with a white NYLON PAD between 2 and 36 hours after application. For furniture application, sand with 600 or 800 grit between coats.

  • After 24 hours: applying the second or third coat;
  • After 5–7 days: regular use;
  • After 10 days: maintenance with LIGNA products.

NUMBER OF COATS:

When applied as a finish on TANDEM-1: 1 to 2 coats;

When used alone: ​​2 to 3 coats.

Each coat slightly increases the lustre as well as the resistance.

COVERAGE:

190 – 360 sq.ft./Litre.

TOOL CLEANING:

Use LIGNA thinner, ISO-DILUANT.

MAINTENANCE:

Use LIGNA SOLIA and SOLIA+ soap for oiled surfaces.

Wait 10 to 15 days for the surface to be well sealed before it comes into contact with water.

REFRESHMENT COAT:

Add a thin coat of oil after:

  • Floor: 3 to 7 years;
  • Low demand surfaces such as mouldings, walls and furniture: 7 to 15 years.

HOW TO REFRESH AN OILED RESIDENTIAL FLOOR!

COMPOSITION:

Vegetable oils, resins and waxes.

VOCs:

449 g/litre.

FINISH:

Matte satin.

CONSERVATION:

From 2 to 3 years in an airtight container stored in a dry and cool place.

SIZES:

20 mL/237 mL/946 mL/3.78 L/18.9 L.

WARNING ! Colours may vary depending on the preparation and the type of wood. It is best to try the colour on an invisible surface before complete application. The 20 ml demonstrator is the ideal solution to avoid hassle. The colour images below may differ from reality as they are viewed on a computer screen.

YELLOW BIRCH – PINE

Safety Data Sheet

Technical Sheet

⇒List of covering powers⇐

How To LIGNA – Oil

You may also like…

View all products