Construction and Panel Adhesive AC-0055 is a high-solids adhesive for the installation of wall panels, panelling (including FRP and Plas-Tex® NRP®), baseboards, mouldings (including MDF), cork and acoustic tiles.
AC-0055 is also used for sub floor mounting, laying rigid insulation boards and glue the metal corners to the gypsum board. Meets CGSB Standard # 71- 26-M88.
- Underfloor installation
- Installation of gypsum
- Moulding installation. framing in plinth of wood or MDF
- Bath and shower contour installation
- Installation of wall panels
- Metal corner installation for gypsum
- Doubling an under floor (plywood on plywood)
- Doubling a sub floor (plywood on particle)
- Very strong adherence
- Fast setting
- Drying time: 30 to 40 minutes
- Viscosity 800 – 900 cps
- Solids 68 ± 1%
AT THE TROWEL: Spread the adhesive with a 5 mm (3/16 “) V-notch trowel held at a 45 ° angle. Spread the adhesive evenly from the center and at the edges of the panel.
BY POINTS: Affix dots 3 cm in diameter by at least 6 mm thick to all 30 cm by 30 cm over the entire surface.
IN ALL CASES: Within 10 minutes of application of the adhesive. press the materials firmly into place to smooth the adhesive between the two surfaces. Use a roller to apply even pressure and get the maximum transfer of the adhesive. Do not move the panel once in place.
Wait 48 hours before applying force to the materials. Hardening takes 5 to 10 days.