EVO’s CLEANER-CONDITIONER for concrete and metals is a non-VOC biodegradable based on organic acid and water. It is specifically formulated to remove traces of contaminants such as oil and grease.
EVO’s CLEANER-CONDITIONER increase the adhesion of finish coatings like epoxy, polyaspartic and concrete hard wax oil.
- Biodegradable and water based ;
- Eliminate most contaminants ;
- Ready to use ;
- Replaces muriatic acid with benefits ;
- Increases the adhesion of the coating ;
- Effective cleaning of galvanized steel and other metals ;
- No VOC.
Application :
- Apply the diluted solution generously with a garden sprayer, a cloth or a mop.
- Keep the surface moist with the product for a minimum of 5 minutes and a maximum of 15 minutes.
- It is important that the surface remains moist during this time (apply again as needed).
- Ideally, proceed by sections of 100 sq.ft. to avoid the product from drying before acting.
- After 15 minutes, rinse thoroughly until complete elimination of the foam.
- If the product dries or is poorly rinsed, hard-to-clean white circles will appear on the surface.
Conservation :
3 years (hermetic plastic container/between 1 and 30 °C)
Coverage :
460 sq. ft.
Formats :
3.78 L / 18.9 L