EVO

COLORWOOD – Water-based Wood Stain – EVO

12.95 $29.95 $X

Wood Stain with Superior Quality!

COLORWOOD by EVO is a water-based acrylic stain compatible with all wood species. It is made of high solid content and its colours are resistant to UV rays. This low odor dye can be used alone on interior surfaces not exposed to abrasion. If COLORWOOD is used on highly stressed surfaces, it must be covered with an appropriate finishing product such as a water-based varnish or a finishing oil. Furthermore, this wood stain is formulated to raise the grain of the wood to a minimum. Its spreading agent greatly reduces overlapping and facilitates application, in addition to having excellent covering power. Let your creativity run wild and have fun creating your own colours, the possibilities are endless. The base colours are easy to mix and quickly give the desired effect. COLORWOOD is the perfect solution to easily stain your furniture, cabinets and woodwork.

  • Easy to use 
  • Very light odour 
  • Excellent coverage
  • Enchances the wood grain
  • Colours are resistant to UV rays
  • Colours are easily mixed together
  • Can be used alone or protected by a finish

USE :

COLORWOOD by EVO can be used on all types of wood, both horizontal and vertical. For high stressed areas, these must be covered with a finish.

PREPARATION :

  • Apply only on unfinished wood.
  • Sand with 120-150 grit and dust.
  • Prepare surface thoroughly to ensure that it is free of wax, varnish or other contaminants.

APPLICATION :

  • Mix product well before application.
  • Apply the product evenly and generously with a stain pad or a brush on the entire surface. Spray application is also possible.
  • Quickly wipe off excess with a lint-free cotton cloth in the direction of the wood grain.
  • Work one section at a time to avoid drying before wiping.
  • For surfaces not exposed to abrasion, apply a second coat of COLORWOOD after 2 hours to seal the wood. The colourless version can be used to avoid darkening your colour. Sand lightly with 220 grit between coats. If after 3 hours, sand with 180 grit instead of 220.
  • For surfaces exposed to abrasion, apply at least 2 coats of a good quality water-based varnish or a finishing oil between 2 to 24 hours after the application of COLORWOOD and according to the recommendations of the finishing product’s manufacturer.

NUMBER OF COATS :

1 to 2 coats depending on use.

DRYING TIME :

  • TO THE TOUCH: 15 to 20 minutes.
  • BETWEEN COATS: 2 to 24 hours.
  • APPLY FINISH: 2 to 3 hours.
  • FULL DRYING TIME: ~5 days.

TOOL CLEANING :

Water.

COVERAGE :

110 to 150 ft2 / Litre depending on wood species and application method.

FORMATS :

118 mL | 237 mL | 473 mL | 946 mL

COLOURS :

  • Colour chart including 12 basic colours + 48 mixing examples with recipe (ratio).
  • The 12 base colours can be mixed together to create a multitude of shades.

FINISH :

Matte (For two coats of COLORWOOD)

MAINTENANCE :

Use EVO BLACK SOAP.

STORAGE :

  • In a tempered area between 15°C and 30°C.
  • In an airtight container.
  • If the quantity of product to be stored is minimal, transfer to a smaller container for better preservation.

WARNING :

  • If possible, avoid sunlight exposure during application.
  • Keep out of reach of children.
  • Protect from freezing.

Technical data sheet | Safety data sheet | Product sheet | Promotional leaflet

CAUTION ! Colours may vary according to preparation and wood species. It’s best to test colour on an invisible surface before full application. The images below may differ from reality and may vary from screen to screen.

12 BASIC COLOURS

CAUTION ! Colours may vary according to preparation and wood species. It’s best to test colour on an invisible surface before full application. The images below may differ from reality and may vary from screen to screen.

You may also like…

View all products