OWATROL

Reactiv Leaf Rust – Rust effect coating – OWATROL

62.95 $254.95 $X

This coating, applied to properly prepared non-ferrous surface, gives a rust appearance and when combined with RUST SPIRIT gives a natural decorative rust effect.

Non-Porous and Difficult Surfaces (Plastic, Glass, Stainless Steel, Non-Ferrous Metals….) : Primer surface with BONDING AGENT prior to using REACTIV LEAF RUST.

Surfaces Sensitive to Acids (Woods high in tannin e.g. Oak, Chestnut…. Some Plastics) : Primer surface with BLOCKING PRIMER prior to using REACTIV LEAF RUST.

APPLICATION :

Use as is. Do not thin. Shake well before use.

Apply a generous coat of REACTIV LEAF RUST to cover the surface.

Allow to dry.

If after drying areas appear not to have enough REACTIV LEAF RUST a 2nd coat may be necessary.

Allow to dry.

TIPS :

Using a brush to apply REACTIV LEAF RUST with a dabbing action allows for a very natural rust effect to be created.

COVERAGE :

± 5 m2/L

± 53 sq. ft./L

TOOLS :

Brush / Roller

APPLICATION TEMPERATURE :

Between +5°C and +25°C

DRYING TIME :

6 hours (minimum)

CLEAN-UP :

Water

Technical data sheet

Safety data sheet